Compfil™ SF

The Compfil™ SF filter is designed for removal of particles from gases, liquids and steam. The SF consists of a re-generable isostatically pressed filter cylinder made from sintered stainless steel. The retention rate ranges from 1μm to 25μm.

Applications

• Aseptic packing

• Plastics

• Electronics

• Dairy

• Pharmaceutical

• Breweries

• Food and beverages

• Chemicals

• Fermentation

Features and Benefits

• Filter media and end caps made of stainless steel
Good durability against most liquids, gases and aggressive steams. Temperature range from -20°C (-4°F) up to 210°C (410°F).

• Retention rate of 1μm, 5μm and 25μm (98% efficiency for steam and 100% efficiency for gases)
Exactly defined particle retention rate at given pore size.

• Sintered stainless steel filter medium with a porosity level of more than 50%
High dirt holding capacity, good flow rate at low differential pressure.

• Regenerable with ultrasonic bath
Filtration costs reduced to a minimum, in particluar for high dirt load.

• Stainless steel sintering technology
No use of additives or other chemical binders needed.

• Available in 13 sizes
Optimum filter size for individual application.